Extra Inline Equipment Components - Corner Mount LV Terminal

The task of creating an HVAC Component is initiated from the HVAC Window.

1. Select Extra Plant Equipment in the Categories dropdown list.

2. Select Corner Mount LV Terminal in the Available Type dropdown list to display the Corner Mounting LVT window:

   

   The Corner Mounting LVT window default is a standard stock size, but can be changed by using one of the following methods:

   • Standard Stock Sizes

   • Non-Standard Stock Sizes (Special)

Standard Stock Sizes

3. In the Name(Ref) field, enter the name of the HVAC component.

   Note: The fields will be pre-populated with default dimensions. These dimensions are governed by the details defined in the HVAC Catalog.

4. To choose from the standard stock sizes available from the HVAC Catalog, in the Stock Size dropdown list, select the required dimension for the HVAC component.

5. In the Front Direction specify the axis that should be used. Valid axes are E (East), N (North), U (Up), -E (negative East), -N (negative North) or -U (Negative Up).X, Y, Z, -X, -Y or -Z.

   The Face Clash Vol field is pre-populated with the obstruction volume associated with the Corner Mounting LVT and the ducting.

Non-Standard Stock Sizes (Special)

6. To choose a non-standard stock piece of HVAC, from the Stock Sizes dropdown list, select Special.

   You are required to input the following dimensions:

   • Name(Ref)

   • Duct Diameter

   • Body Radius (A)

   • Body Length (B)

   • Body clHeight (D)

   • Arrive Extension

7. To visualize how the dimensions equate to the actual piece of HVAC, select Picture to display a detailed drawing for Extra Plant Equipment Catalog Element - LV Terminal for Corner Mounting.

   Note: The fields will be pre-populated with default dimensions. These dimensions are governed by the details defined in the HVAC Catalog.

8. Specify a type of joint to use for the Arrjoint (Arrive Joint). For a detailed description, see Create / Modify HVAC Components.

9. After selecting the type of joint to use for the Arrjoint, enter the Front Direction.

10. In the Front Direction, specify the axis that should be used. Valid axes are E (East), N (North), U (Up), -E (negative East), -N (negative North) or -U (Negative Up).X, Y, Z, -X, -Y or -Z.

    The Front Clash Vol field is pre-populated with the obstruction volume associated with the Corner Mounting LVT and the ducting.

11. In the Connect list, select Connect or Unchanged:

    • Select Connect (default when Create is selected) - connects the piece of HVAC to the previous one.

    • Select Unchanged (default when Modify is selected) - positions the piece of HVAC at the co-ordinates 0.00.

    Note: Unchanged is usually used, when Modify is selected, it does not connect the piece of HVAC but positions it at 0.00, in effect in a floating position.

12. Select Defaults to reset all the fields back to when the Corner Mounting LVT window was opened.

13. Select Fit to orientate the Corner Mounting LVT to automatically match the outlet (p-leave) of the previous piece of HVAC to the inlet (p-arrive) of the next piece.

14. Select OK to create the Corner Mounting LVT component and close the Corner Mounting LVT Window. The user will be returned to the HVAC Window.

15. Select Cancel to discard all the field changes and close the Corner Mounting LVT window.