ANGLEACCURACY

Function:

Allows you to specify the degree of accuracy for the reporting of angles on the isometric.

Description:

For bend and elbow angles, and orientation angles for tees, valve and instrument spindles, you can vary the accuracy with which Isodraft reports the angle on the isometric.

You can use one of two settings:

0

To the nearest 0.1 degree (default)

1

To the nearest 0.01 degree

2

To the nearest degree

Examples:

ANGLEACC 1

Sets angle reporting accuracy to the nearest 0.01 degree.

Related Commands:

FALLINGLINES

Command Syntax:

>--- ANGLEACCuracy value --->

where value is either 0, 1 or 2 (as described above).