Structural Fittings
- Last UpdatedNov 14, 2025
- 1 minute read
The positional errors for Fittings are measured as divergences of the Fitting positions from the Neutral Points of the attached Sections. The maximum permissible errors are defined, as for Sections, in terms of a Fitting’s eccentricity.
Keywords:
ECCENTRICITY FITTING
Description:
The ECCENTRICITY FITTING command specifies the maximum permissible distance between the position of a Fitting and that of its attached Section before a diagnostic message is output.
|
Examples: |
|
|---|---|
|
ECC FITTING 1 |
Maximum error in Fitting position is 1 mm |
|
ECC FITT 0.5 INCH |
Maximum error in Fitting position is 0.5 inch |
|
ECC FITT DEF |
Resets permissible Fitting position error to 1 mm |
Command Syntax:
>--- ECCentricity --- FITTing ---+--- <uval> -----.
| |
‘--- DEFault ----+--->
Querying:
Q ECCentricity FITTing