Set Increment Values
- Last UpdatedNov 25, 2025
- 2 minute read
-
Select Selection > Set Increments from the main menu.
The Set Increments form is displayed, the Linear increment will change the value of the handle when dragged, the Fine linear increment will change the value when the keyboard arrows are used, and the Angular increment will change the value of the handle when dragged.
Linear increment
This is specified in the currently active units, or units can be specified by using units of measure syntax. The Linear increment controls the step size used when dragging a Graphical Selection using a linear or planar handle. The default step size in 50 mm or 2 inches.
Fine linear increment
This has the same function as the linear increment, but with a default step size in 5mm. Fine 'nudges' are achieved but using the '2' and '8' numeric keypad keys or the arrow keys with the mouse button held down.
Angular increment
This controls the angular step size used when dragging a Graphical Selection using a rotation handle. The default step size is 5 degrees.
-
In the Fine linear increment change the default value 5 to 1 and click OK.
-
Now select the pipe modification handle.
-
Click the arrows on the keyboard.
The increments now should just move 1mm at a time.
Note: The default setting is 50mm and 5mm for fine adjustment.