Line Summary Area
- Last UpdatedAug 22, 2024
- 2 minute read
The symbol identification texts that are used in the line summary area, along the bottom of the isometric drawing, can be changed or made blank.
If one of these Atexts is changed, the corresponding symbol will still be drawn. If the Atext is made blank, the corresponding symbol will not be drawn in the line summary area.
The following texts are all used as explanatory captions for the examples of drawing symbols used on the isometrics.
|
400 ‘TRACED PIPE’ 401 ‘LAGGED PIPE’ 402 ‘PIPE SUPPORT’ 403 ‘COMPN JOINT’ 404 ‘SCREWED JOINT’ 405 ‘SOCKET WELD’ 406 ‘FIELD WELD 407 ‘SHOP WELD 411 ‘SITE CONNECTION’ |
|
|
The following Atexts also appear in the line summary area: |
|
|
317 ‘PIPE NS’ |
Used in conjunction with Atext 318. The total centre line length for each bore is calculated automatically and listed against this caption. |
|
318 ‘CL LENGTH’ |
Used, in conjunction with Atext 317, to summarize centre line lengths |
|
410 ‘[1] DENOTES PIPE SPOOL NO |
|
|
A standard explanatory note |
|
|
408 ‘ ’ |
Normally left blank. Can be used to add explanatory text in the line summary area. For example: ATEXT 408 ‘PULLED BEND RADIUS IS |
|
409 ‘ ’ |
Normally left blank. Can be used to add explanatory text in the line summary area. For example: ATEXT 409 ‘ALL FLANGES 150 LB RATING |
