Rectangular Components - Deflectrol

The task of creating an HVAC Component is initiated from the HVAC Window.

1. Select Rectangular in the Categories dropdown list and then Deflector in the Available Type dropdown list to display the Deflector window:

   

   You are required to input the following dimensions:

   • Duct width AA

   • Duct depth AB

   • Deflectrol widt

   • Deflectrol dept

   • Dist from Leave

   • B offset

   • First Side Offs

   • Leave Side Offs

2. To visualize how the dimensions equate to the actual piece of HVAC select Picture to display a detailed drawing for Rectangular Components Catalog Element - Deflectrol.

   Note: The fields will be pre-populated dimensions. These dimensions are governed by the detailed defined in the HVAC Catalog.

3. Select Transpose width/depth to exchange Duct width AA dimension with Duct depth AB dimension to exchange Duct width LA dimension with Duct depth LB dimension.

4. In Defl Direction specify the axis to be used. Valid axes for are E (East), N (North), U (Up), -E (negative East), -N (negative North) or -U (Negative Up).X, Y, Z, -X, -Y or -Z.

5. In the Connect list, select Connect or Unchanged:

   • Select Connect (default when Create is selected) - connects the piece of HVAC to the previous one.

   • Select Unchanged (default when Modify is selected) - positions the component at the co-ordinates 0.00.

6. Select Defaults to reset all the fields back to when the Deflectrol window was opened.

7. Select Fit to orientate the Deflectrol component to automatically match the outlet (p-leave) of the previous piece of HVAC to the inlet (p-arrive) of the next piece.

8. Select OK to create the Deflector component and close the Deflector Window. You will be returned to the HVAC Window.

9. Select Cancel to discard all the filed changes and close the Deflector window.