Attributes
- Last UpdatedDec 13, 2023
- 2 minute read
To control the dialog, picture attributes are added on view level. The following general attributes should be used:
|
Attribute |
Variable |
Value |
|---|---|---|
|
9963 |
Endcut specific: |
|
|
I1 |
Number of connection code restrictions. |
|
|
S1-Sn |
Connection code restrictions. |
|
|
9962 |
||
|
I1 |
Number of default designations. |
|
|
S1 - Sn |
Default designation to be selectable within the dialog. |
|
|
9961 |
||
|
I1 |
Order number when displayed in dialog. |
|
|
I2 |
Meaning depending on dialog type: Hole dialog: 0 - Standard hole. 1 - Penetration for a pipe or a ventilation duct. 2 - Penetration for a pillar. 3 - Hole from curve. If the variable I2 does not exist then a standard hole is assumed. |
|
|
Notch dialog: 0 - Standard notch. 1 - Notch from curve. If the variable I2 does not exist then a standard notch is assumed. Endcut dialog: Endcut type. |
||
|
S1 - S3 |
Text presented within the dialog. The text information can be used as documentation for the user. |
|
|
9960 |
||
|
S1 - Sn |
All views are by default displayed in all dialogs. Using certain keywords, some views can be hidden when the dialog is used in certain applications or in a project. The following are valid keywords General PLPL (Planar Plate) PLPR (Planar Profile) SHPL (Shell Plate) SHPR (Shell Profile) STPL (Structure Plate) STPR (Structure Profile) NDIS (Not Displayed) |
|
|
Bracket specific: SYN1 SYN2 SYN3 SYN4 SYN5 SYN6 SYN7 SYN8 SYNV |
||
|
Cutout Specific: 10 20 21 . . . 43 For the classification shapes in drawing __SBH_REST_PLATES__ the contents of this attribute is defined differently as specified below: |
||
|
S1-Sn T The names of classification shape arguments. Totally 7 can be defined. The exact number is defined by I2 below. I1 Shape type I2 Number of arguments |
||
|
R1-Rh Optional default values for each shape argument. |
||
|
Endcut Specific: |
||
|
S1 - Sn |
Excluded profile types. |
|
|
I1 |
Number of excluded profile types. |
|
|
9959 |
||
|
S1 - Sn |
Reference to a new drawing with the same layout (in case the user wants to customize dialogs in levels) or (in some cases) a reference to a Vitesse script. Strings are concatenated. |
|
|
Only the drawings on the top level are having fixed names, defined by the system. Drawings on lower levels are named by the user, all referenced drawings must start with two underscores ("__") |
||
|
9958 |
The presence of such an attribute (on the first view) indicates that no user input is needed. The name of the view shall be returned in dialogs. The content of this attribute is irrelevant. |
|
|
9957 |
The presence of such an attribute indicates that designations are possible to change by the user, that means, the profile dimensions may be changed by the user when selecting a new profile type and dimension. |
|